Quick and Hot AH1300 Water Dispenser Full Manual
Quick and Hot AH1300 Water Dispenser Full Manual
Blog Article
Quick and Hot Instant Water Dispenser User Manual
Thank you for choosing the Quick and Hot Instant Water Dispenser. This appliance is designed to provide you with instant access to hot water safely and efficiently. Please read this manual carefully before use to ensure proper operation and maintenance. quick & hot ah-1300 manual
1. Product Overview
Water Tank: Holds cold water to be heated instantly.
Heating Element: Quickly heats water to the desired temperature.
Dispensing Nozzle: Dispenses hot water safely.
Control Panel: Allows you to operate the dispenser and adjust settings.
Safety Lock: Prevents accidental dispensing of hot water.
Power Cord: Connects the dispenser to an electrical outlet.
2. Important Safety Instructions
Use the dispenser only for heating and dispensing water.
Do not touch hot surfaces; use handles or knobs.
Keep out of reach of children.
Use only clean, potable water.
Do not operate if the power cord or plug is damaged.
Unplug when not in use or before cleaning.
Do not immerse the appliance in water or other liquids.
3. Installation
Place the dispenser on a stable, flat surface near an electrical outlet.
Ensure the dispenser is away from heat sources or flammable materials.
Connect the power cord securely to the outlet.
Fill the water tank with clean, cold water up to the indicated maximum level.
4. Operating Instructions
Turning On the Dispenser:
Press the Power button to switch on the unit.
The heating element will begin to heat the water immediately.
Dispensing Hot Water:
Press and hold the Safety Lock button to unlock.
Press the Dispense button to release hot water from the nozzle.
Release the Dispense button to stop the flow.
5. Temperature Settings
The dispenser allows selection of water temperature between 80°C to 100°C.
Use the Temperature Control buttons to increase or decrease the temperature as desired.
The current temperature setting will be displayed on the control panel.
6. Cleaning and Maintenance
Unplug the dispenser before cleaning.
Wipe the exterior with a damp cloth.
Do not use abrasive cleaners or immerse the unit in water.
Regularly descale the heating element using a vinegar solution or a commercial descaler to prevent mineral buildup.
Empty the water tank if the unit will not be used for an extended period.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser does not heat water | Power not connected | Check power connection |
| Heating element malfunction | Contact customer service | |
| Water flow is slow or blocked | Nozzle clogged | Clean the dispensing nozzle |
| Water tank empty | Refill water tank | |
| Safety lock won’t disengage | Lock button stuck | Gently press and release button |
8. Technical Specifications
Voltage: 220-240V AC, 50/60Hz
Power Consumption: 1000W
Water Tank Capacity: 3 liters
Temperature Range: 80°C - 100°C
Dimensions: 30 cm x 25 cm x 35 cm
Weight: 2.5 kg
9. Warranty and Support
This product includes a 1-year limited warranty covering manufacturing defects.
For service or support, contact the customer service hotline or visit our website.
10. Disposal
Dispose of this product in accordance with local electronic waste regulations.
Do not discard in household waste.
Thank you for using the Quick and Hot Instant Water Dispenser. Enjoy your convenient hot water anytime!
Report this page